brand:Dakeya Model name“Da03 Motor:2* 1000w Tire:26*4.0in Max speed:35MPH(56KM/H) Gears:Shimano 7-speed Weight:35KG Max load:160kg/350lbs Brake:Front and rear hydraulic disc brakes:Shock absorption;Fork Shock Absorption ;Central Shock Absorber Battery:48V/22.4AH . current of charger:3A Charging time:6~ 7hours Material:Body aluminum alloy 3 WORKING MODES 1. Pedal Mode ●tum off the ignition key。 ●At the Pedal Mode, the motor doesn't work ,and the human riding has no electric power,you can Pedal the Bicycle Normally as you would any bicycle. ●In pedal mode, you can adjust the GEER level through the "gear regulator ”switch shown in the above figure(3*7-speed gear). 2. Fully Electric Mode ●tum on the ignition key.At the Fully Electric Mode or the Pedal Assist Mode,the motor will work. ●Long press the power on/off button for 3 seconds until the display lights. ●When the power is turned on, you can control the forward movement of the electric bike through the handle throttle 3. Pedal Assist Mode(PAS) ●In Fully Electric Mode,Just turn on the switch a lilttle bit, don't drive too fast, and then pedal the electric bike, so it enters pedal assist mode ●If you want to step on your feet more easily, twist the switch to increase the speed. If you want to exerdise more with your feet, twist the switch to increase the speed. The speed is still mainly controlled by the switch. The advantage of riding in this way is that it can help reduce the instantaneous electricity required for electric bicycles to start, which is beneficial for protecting the battery and motor. Additionally, the speed control is stable and there is no overshoot. ●In pedal assist mode, it can increase the driving range of electric bicydes and increase the pass rate under adverse road conditions Tips: Full Electric Mode (i.e. using throttle only) is for flat roads. Do not use Full Electric Mode on slopes or rough roads or beaches, otherwise excessive resistance will cause the motor or controller damage. If the road condition is unsuitable or too rough, please use PAS (Pedal Assist System) mode. PAS is when you use your feet to pedal in order to help the motor overcome resistance. Riding with power assisted mode , if use speed shifting & climbing mode on flat road will waste electric power and accompany with the feeling of empty treading. Display Settings To change display settings, hold the up and down button simultaneously to enter into the advanced settings menu In this menu,clicking the TAB-1 button will toggle between each numbered(P01~P16) setting.To adjust the value of each setting,click the up and down buttons accordingly. .
Returns Accepted for this item if it's within 30 Days